نوار کناری
سنسور القایی مدل PL-05N با خروجی NPN
133,000تومان
کد محصول: 2661
موجودی در انبار
تعداد بازدید 680 بازدید
دسته بندی هاسبد خریدحساب کاربریجستجومشاهده های اخیر
همه دسته بندی ها×
- برد رزبری پای - RASPBERRY PI
- بردهای کاربردی تحت سیستم عامل
- بردهای کاربردی صنعتی
- تجهیزات الکترونیک
- تجهیزات جانبی
- تغذیه سوئیچینگ صنعتی-آداپتور-منبع تغذیه
- جعبه - کیس های مدار و برد
- دستگاه کنترل پیامک
- ماژول ها
- ISM Band
- LCD
- درایور موتور
- دوربین
- ماژول اثر انگشت
- ماژول دما و رطوبت
- ماژول سنسور گاز
- ماژول های GSM/GPS/GPRS
- ماژول های RFID
- ماژول های آلتراسونیک
- ماژول های بلوتوث
- ماژول های تایمر و پالس
- ماژول های تغذیه و ولتاژ
- ماژول های شبکه و WIFI
- ماژول های شتاب سنج و ژیروسکوپ
- ماژول های صوتی و آمپلی فایر
- ماژول های فرستنده و گیرنده
- ماژول های فشار
- ماژول های مبدل
- ماژول های پزشکی و ضربان قلب
- ماژول های کاربردی
- ماژول پرینتر
- موتورها
- پروگرامرها
- کتاب های آموزشی و کاربردی
- کیت های آموزشی
- بردهای آموزشی ARM , AVR , PIC , FPGA
- روباتیک
- آردوینو
- سنسورها
- LED
- ریموت و کنترل کننده های صنعتی و کاربردی
- آنتن ها
- قطعات پروازی و ربات های پرنده
سبد خرید×
سبد خرید شما خالی است !
جستجو×
محصولاتی که بازدید کرده اید.×
توضیحات محصول
سنسور القایی مدل PL-05N با خروجی NPN
Inductive Proximity Sensor PL-05N NPN Limit Switch is used for controlling machinery as part of a controlsystem, as a safety interlock, or to count objects passing a point. A limit switch is an electromechanical device that consists of an actuator mechanically linked to a set of contacts. When an object comes into contact with the actuator, the device operates the contacts to make or break an electrical connection. Being an inductive switch, no physical contact is required between the switch and the metalic surface being sensed.
Limit switches are used in a variety of applications and
environments because of their ruggedness, ease of installation, and reliability
of operation. They can determine the presence or absence, passing, positioning,
and end of travel of an object. They were first used to define the limit of
travel of an object; hence the name "Limit Switch".
Limit Switch devices are typically used with Laser Engraver or CNC based machines
to sense the end of travel of an axis.
Typically used in CNC and Laser Engraving machines which
uses a metal target to sense the end of travel on an axis.
Specification
- PL-05N
- Square Type
- Sensing distance: 5mm
- Operating voltage: DC5-30V
- Response frequency: 800Hz
- Output method : NPN, 150mA load
- Hysteresis: <10% of sensing distance
- Protection degree: IP67
- Working temperature/Hum : -20 ~+80C, 35%~90%RH
- Body dimension : 30.5 x 17.9 x 10.2mm, LxWxH
- Mounting Method: Flush
- Sensing Direction: Horizontal
- Material Housing: High-impact plastic
- Screw hole : 3.2mm, Pitch : 10.5mm
- Wire length : 100cm (39-inch)